Portables Quick Start Guide

Take EMF protection with you everywhere with our portables.
Close-up of a child's purple backpack with a flower patch and a white Phi device in the zippered pocket.
Three portable devices labeled EVO and Blushield in black, red, and gray on a white background.

EVO, Sensitive, & Ultimate Portables

These Blushield Portable models feature a power button, power indicator light, USB-C charging port, and battery indicator lights. Press and hold the power button for ~3 seconds to turn the device on or off. When powering on, the battery lights ascend and then go out as the power indicator light illuminates, signaling that the Blushield technology is active. The power indicator light stays on for ~30 seconds, goes off for ~3 seconds, and then illuminates again. This pattern repeats as long as the device is powered on. To turn off the portable, press and hold the power button until the battery indicator lights descend and all lights turn off.

The extent of the battery life is primarily indicated by the fourth (top) light. When the fourth light goes out, the battery charge is getting low and will soon go flat. Therefore, it is best to keep the battery charge topped off between uses or plug it in to charge as soon as the fourth light is out. A short press of the power button, whether the device is on or off, will illuminate the battery lights to show the current charge level.

When plugged in and charging, the power indicator light is off and the battery indicator lights illuminate and flash to the level of charge the battery has. The first, second, and third lights will quickly turn solid. The fourth and final light will flash and take the longest to fulfill. Once the fourth light becomes solid, the battery is fully charged. Unplug the device once fully charged to preserve battery health.

For more information regarding each specific portable model, visit their product pages: EVO Portable, Sensitive Portable, Ultimate Portable.

Line diagram of a flat Blushield device with labeled callout points
Component Identification
A
ON / OFF Button
B
Power Indicator Light
C
USB C charging port
D
Battery Indicator Lights
Black portable device with a shield logo and the symbol Phi 1 on a white background.

Phi 1 Portable

The Phi 1 Portable features an on/off button, USB-C charging port, and a power indicator light. To power the device on or off, press the button for three seconds. When powered on, the indicator light is illuminated green. The green light stays on for approximately thirty seconds, then goes out for a couple of seconds, then back on. This pattern will repeat for as long as the device is on. When the battery becomes low, the indicator light will turn solid red and die shortly after if not recharged.

A fully charged Phi 1 battery lasts approximately 72 hours.

It takes just under two hours to fully charge an empty Phi 1 battery. While the portable is charging, the power indicator light will flash red. Once fully charged, the light turns solid green and the device should be removed from the charger to protect the health of the battery.

The Blushield technology is not active while the device is charging.

Proper Care of Lithium Ion Batteries

Charge habits and usage of lithium ion batteries make a big difference in lifespan and safety. The following is what matters most when caring for your Blushield portable. Percentages used are inferences - since the portables do not give exact percentages of charge.

Partial charge cycles are better than full cycles. Many small top-ups are better than full drain to full charge cycles.

Keep charge between ~20% and 80% when you can. Lithium ion batteries wear out faster when they sit at very high (100%) or very low (0%) charge. Ideal use: top up before it dies, and unplug when it is almost fully charged. That said, don't stress about it occasionally hitting 100%. Just avoid leaving it there for long periods.

Avoid deep discharges. Letting a battery drain to 0% regularly strains it. Occasional full discharge is fine (for calibration), but not as a habit.

Don't keep it plugged in 24/7. Constant 100% charge causes heat and adds wear. And as we said above, staying at 100% reduces the life of the battery.

Heat is the #1 enemy. High temperatures degrade batteries faster than anything else. Avoid leaving devices in a hot car or charging under a pillow.

Very cold isn't great either. Cold temperatures temporarily reduce performance. Charging when the battery is very cold can cause damage. Let it warm up first.

Store properly if you are not using your portable. If you won't use your portable for weeks or months, store it at ~40-60%. Avoid storing fully charged or completely empty. Keep it in a cool, dry place.

Use quality chargers. Cheap chargers can cause overheating or unstable charging. Stick to manufacturer approved, or reputable brands. You can find our charging cords here, and charging blocks here.

Blushield Ultimate portable device with a coiled gray USB-C to USB-A smart charger cable.

Please note: Due to the value of the products, all orders for Blushield technology are shipped with signature confirmation required.

Stay Informed, Stay Protected

  • Product updates

  • Practical tips for low-EMF living

  • New releases

  • Exclusive promotions

Frequently asked questions

Invisible forces are part of modern life, but their impact doesn’t have to define you. Blushield works quietly in the background, supporting a more stable, balanced internal state so you can focus, rest, and perform at your best.

What does a Blushield device actually do?

It doesn't block or shield EMF. Instead, Blushield is designed to support the body's natural response to everyday electromagnetic exposure. By focusing on biological support rather than altering environmental signals, it takes a different approach to EMF protection.

Which device is right for me?

Plug-in units (Premium, Ultimate, Phi) cover your home. Portables cover you when you leave it. Most people start with one of each: a plug-in for the house and a portable for travel, work, and the car. If you're not sure, use our Find Your Device tool or message us.

What's your return and warranty policy?

30-day limited money-back guarantee on every device (restocking fee applies - see our full return policy). Stationary and portable units carry a 1-year warranty. If anything extends past that, contact us.

Do I still need it if I have low EMF readings at home?

Yes. EMF meters measure intensity, not biological impact. Even low-level exposure from Wi-Fi, Bluetooth, smart meters, cell towers, and nearby homes accumulates 24/7. Blushield works on the body's response, so it helps regardless of what a meter reads.

How long until I feel a difference?

Some people feel calmer or sleep better within the first night. For others it's a few weeks of gradual change - better focus, deeper sleep, and less fatigue. A small number notice a short adjustment period as the body recalibrates. Everyone responds differently, so give it time to become part of your daily environment and let the benefits build naturally.

Is there science behind this?

Yes. Blushield is built on decades of research into how the body responds to coherent vs. incoherent electromagnetic signals. We have independent studies, HRV data, and live-blood analyses on our Science page. We don't make medical claims. We point you to the data and let you decide.